Road Marking Paint

 
Thermoplastic Road Marking Paint

1569049016125674.jpg

Introduction:

Thermoplastic reflective road marking paint is made of thermoplastic petroleum resin, high-quality pigments and additives. Using it to mark line, the thermoplastic road marking paint has the advantages of quick drying, easy construction, good light reflection and long service life.

Application:

It can be used in asphalt or concrete road for long-acting marking.

Technical Data:

We can produce different standards of thermoplastic road marking paint, such as Chinese standard (JT/T280-2004 and GB16311-2009), BS standard, AASHTO standard and so on. The contents and raw materials are different with different standards. We can also produce according to customers’ non-standard customization.

Raw  Material

C5  Petroleum Resin, CaCO3, Glass Beads, DOP, PE, etc.

Gravity,  g/m3

2.1  g/ml

Color

white,  yellow,  etc.

Heating  Temperature

150-220

Softening  Point,

110

Coating  Appearance

No  wrinkles, dots, blisters, cracks, fall-out & stick tyres

Drying  Time, min

Within  3 minutes

Compressive  Strength, MPa

26

Abrasive  Resistance, mg

42

Water  Resistance

Great(in  water for 24 hours)

Alkali  Resistance

Great(in  saturated solution of calcium hydroxide for 24 hours)

Glass  Beads, %

20%

Fluidity,  s

40s

Coating  Resisitance

Resist  -10 for 4 hours

Heat  Resistance

Under  200-220 for 4 hours

Package & Use:

Package

25kg/bag,  by plastic woven bag. One 20' container can load Max. 25 tons.

Storage

dry, cool,  avoid direct sunlight

Expiration  date

365  days

Theoretical  spray rate

4-5kg/

Features:

1. Cohesiveness

Specific formula, of good cohesiveness with road, pre-mark with our company’s dedicated primer (especially for concrete base) will strengthen the cohesiveness.

2. Anti-slipperiness

Our paint has anti-slipping material. On condition of good flowability, the anti-slipping material can ensure good anti-slipperiness and maximize the traffic safety.

3. Reflective effect

According to the settling rate of the glass beads, properly choose stable refractive and high quality coating type glass beads with different particle ratio. Mix them evenly inside the paint and dispense mixed type glass beads when executing will ensure new and old marking always to be in high reflection.

4. Dry fast

Use different formula to produce the paint according to temperature, humidity and roadbed condition when executing, ensure fast drying speed and antifouling property of the marking.

5. Stability

Choose excellent light and heat stability raw material ratio, add ultraviolet-proof additives at the same time, to make sure the long-acting color and luster even under strong sunshine.

6. Anti hair-cracking

Hair-cracking of the marking is a technical problem in road marking material industry home and abroad. After long-term research and by way of adding high temperature resistance lipid material and functional filler, our company completely solved the hair-cracking problem during executing.


Previous: No more